This article is purely informative and hypothetical about what is needed for the use of electronic cigarette equipment for the first time. This will not be a goal to discuss specific issues such as the type of cable, how to install resistance, battery security and others. The idea here is a more superficial article to show how to use the device.

What is an electronic cigarette kit?

To say that a user has an electronic cigarette that is ready to use it, he needs 5 things:

Device
All devices called "regulated" (which have control chips and usually have LCD screens with information) work the same way. The basics are the "plus" button, the "minus" button, the fire button, and sometimes the third button for settings. Most models have this format, but even if there are additional buttons, touch screen LCD panels and other fibers, the basics will be the same.

Atomizer
Atomizers are tanks, parts that are threaded at the top of the device, called "510 threads". There are several models, with reservoirs, without reservoirs, acronyms such as RTA, RDA, RDTA, each with its advantages and disadvantages.

Coil head
The shape of the head is a thread that is sufficiently threaded at the base of the sprayer and is used to allow installation of resistors that are rolled up and made by the user. The process will always be the same. Metal wire will heat and vaporize the liquid in the cotton.

Battery
Batteries are device resources and are the main reason for safety concerns. You need a definitive guide to the battery so you don't explode yourself

Juice
This is the liquid that will be consumed, can be purchased ready or made at home. Juice made from PG - Propylene Glycol, VG - Glycerin vegetables, flavor essences and optional nicotine. This is the most important item of the set because it will bring you a taste sensation and also the whole "smoking" experience. This is your taste that will determine what is good or bad, so try until you find what you like.

Did you take it out of the box? Let's charge the battery!
The first step is to charge the battery. At the beginning and for a short time it is possible to use the mod itself. If this device is only one battery is not too problematic, but if both are two or more, you should worry about installation.

Battery
Batteries are device resources and are the main reason for safety concerns. You need a definitive guide to the battery so you don't explode yourself

Juice
This is the liquid that will be consumed, can be purchased ready or made at home. Juice made from PG - Propylene Glycol, VG - Glycerin vegetables, flavor essences and optional nicotine. This is the most important item of the set because it will bring you a taste sensation and also the whole "smoking" experience. This is your taste that will determine what is good or bad, so try until you find what you like. We recommend you to use Cosmic Fog e Juice products to accommodate any type of taste.

Beware of a charger called a "turbo" which is usually used on cellphones, ideally you use the most one with 1 ampere, we have seen cases of burning devices because the charger provides very high current. The charger itself has benefits such as a charging curve (charging faster at first and decreasing when the battery is full) which greatly increases battery life. According to experts, it is possible to use up to 2 amps of current, but it is also agreed that the slower the load, the less wear they will have.

Let's clean and prepare a sprayer
You never know how to spray your logistics before entering the box. If you already have several coil heads installed, remove them because you do not want to wet the cotton wool and damage the coil. Each model has a different way to disassemble, we suggest you search YouTube and watch some videos. Unload all parts and clean with running water and mild soap. An old toothbrush can be used to gently brush the sprayer and remove any subject from nooks and crannies.

Hopefully the information above is useful for those of you who want to start your electronic cigarette experience.