Boondoggles are a simple, helpful craft project that individuals of all ages may complete. It is possible to create them to attach to key chains, belt loops, and even water bottles. After starting a lanyard and coming close to the conclusion, you might be wondering how to complete the project. As long as you add one more stitch to your lanyard, tie a few tiny knots, or use a lighter, you may finish your lanyard in a short amount of time. This article will offer you a step-by-step guide to help you start a boondoggle with 4 strands that many people struggle with. Please choose your favorite cord colors, and let's begin making a boondoggle with four stands.

What is a Boondoggle?
A boondoggle is a piece of cord that has been knotted. Boondoggles are quick, last-minute crafts that may get thrown together to pass the time. They don't need to be complicated or even helpful - they have to be made fast and without much consideration. A typical starting point for boondoggle patterns is that the completed product's length should be at least as long as the number of strands used, and specific projects work best when the finished product's size is twice as long as the number of strands used. Boondoggles are made with cords of different colors, and they can have various strands.

How to Start A Boondoggle with 4 Strands
Boondoggles are frequently made with plastic cords which may be bought in various colors and are easy to work with. Simple stitches are suitable for beginners, but skilled lanyard-makers may construct elaborate woven designs with more complex stitches. The square stitch is a basic, beginner-level stitch that may get used in virtually any type of lanyard-making project. Making a boondoggle is divided into three stages: beginning the stitch, continuing the stitch, and terminating the stitch.

To start your boondoggle, push each strand through its corresponding loop (loop 1 goes through loop 1, etc.) so that they are all connected by their one free end. For example, if your strands are green, yellow, blue, and red, push the green strand through loop 1, the yellow strand through loop 2, and so on:

Step 1: Cutting
Cut two pieces of cord to the same length from the same color thread. Make four strands by connecting the ends of both pieces. Please keep your fingers down the strands until you reach the point where they begin to fold in on themselves. Begin your stitching here, in the middle of the row.

Step2: Make a cross shape
Put one piece of cord over the other in the center to form a cross shape.

Step3: Positioning the cross shape
Between your thumb and fingers, grasp the middle of the cross where the strands come together.

Now repeat this process for all four strands. Remember that each strand starts by being connected through its loop (for instance, green at loop 1), then twisted together into one giant loop (all four strands in this case). So when you attach your second strand, it will get pushed through the loop of the first strand, then twisted with all three others.

Step 4: Creating Loops
A loop may get made by taking one strand and bringing it over your fingers. Repeat it on the opposite side to create another loop that will travel in the opposite direction. After that, you should have two loops of the same color that are flowing in opposing directions. The hand's fingers that are clutching the cord should be used to hold these loops in place.

Step 5: Integrating the contrasting colors
Take one end of the loose strands of the contrasting color and tie it together. Bring it over the loop it's closest to, and beneath the loop, it's furthest away from the first one you made. Carry out the same method on the other side to make it move in the other way. Make the opposing strand cross over the closest loop, and beneath the loop, it is furthest away from the first one you created.

Step 6: The Final Act
Take all four strands and carefully pull them together until they are all one piece. Pull them up until they're snug and secure.

Step7: Ensuring the work is perfect
Form loops with the same colors you used when you completed the starter stitch.
You need to ensure that as you go down the boondoggle, your loops are tight, and you stitch the loops correctly, or your boondoggle won't hold. Exactly like with the starting stitch, follow the same steps. To finish the loops, take a free strand and pass it over the loop it is closest to, and under the loop it is furthest away from. Please take the free strand on the other side of the loop and cross it over and under the loop on the other side.

Finishing may sound complicated, but it is doable and straightforward:

· Make a loop with the strand in your hand and pull it up through the center of the stitch. Take the strand you are holding in your palm and push it up through the center of the lanyard stitch to complete the stitch pattern. It will tie your strand together in a tiny knot of some sort.

· You do not need to tighten this knot just yet. Maintain a loose fit so that you may work with the other strands.

· Alternatively, wrap another strand of the other color around the same color on the other side. Remove one of the colors you just used and wrap it around another cord of the same color on the other side of the strand you just used. If you are using green and black and have used black, use one of the green strands and wrap it around the opposite green strand.

Conclusion
When you make a square knot boondoggle, you may struggle with getting the first one tight enough without it curling up. Keep practicing how to start a quad boondoggle with 4 strands, and you will get better with time. If you struggle with 4 strands boondoggle instructions, watch tutorials and follow what the person in the video does. Flat thread is the most commonly used type of thread for this craft, and it is available in a variety of colors. Boondoggle is a braiding and knotting craft that uses plastic cording, but people use different cords. People turn boondoggles into bracelets and key chains, and they have become a symbol for friendship.